Galvanized Steel Wedge Anchors For Stone Cladding

Specifications – AOZ ANCHOR SYSTEMProduct Namegalvanized steel  wedge anchors for stone claddingMaterialSteel galvanizedSizeM6-M30   10-200mmStandard ModelDIN,ASTM,JIS,BS,AISI,NonstandardFinishZinc Plate or yellowCertificateCE,ISO9001,SGSMin Order2000pcsPacking Listin cartons and then on palletDelivery TermFOB/C&F/CIFDelivery Lead TimeWithin 20days after the order is confirmedPayment Term30% by T/T as Downpayment,the balance against the copy of B/L;L/C at sightgalvanized steel  wedge anchors for stone cladding: Wedge anchor consists of two pieces permanently preassembled into a single unit. The carbon steel rod is threaded for a portion of its length. The extreme end of the threaded portion is rounded to protect the threads from damage while the anchor is being driven into the hole drilled in the concrete. The other end of the rod has a necked down diameter, which runs for a short distance, at the end of which it tapers outwardly to the full diameter of the rod. A precision formed universal clip made of carbon steel is permanently assembled around the necked down diameter to complete the anchor. Each package contains the correct number of nuts and washers. Approvals:●Listed by Underwriters Laboratories (UL) Listed, EX2224(N)●NY Board of Standards and Appeals●Meets or exceeds U.S. Government G.S.A. Specifications FF-S-325 Group 11, Type 4, Class 1Applications: Light to heavy-duty into solid concrete. Installation:●Drill a hole in the concrete using a hammer drill and a carbide tipped masonry drill bit conforming to ANSI B94, 12-77, the same diameter as the wedge anchor. If the fixture being fastened is in place and being used as a template to locate the hole for the anchor, the mounting hole in the fixture should afford clearance for the universal wedge clip on the stud.●Clear the hole of all debris, then place the wedge anchor through the hole in the fixture or directly into the concrete, and hammer it in to the drilled hole, ensuring that they are installed to the desired depth.●Turn the nut by hand until the unit is "snugged up". Tighten the nut with a torque wrench to ensure they are tightened to the required torque value.